Swim Charge Fins (Below Zero)
The Swim Charge Fins are a piece of equipment and an item upgrade for the Fins that can be assembled using the Modification Station.
They recharge the energy of any tool the player holds in their hands as they are swimming. Using the Swim Charge Fins thus reduces the overall need for batteries and power cells. It charges any tool held in the player's hand by 1% for every ten meters swum. This applies even if swimming up using Space or down using C. The energy generation is higher than the Seaglide's energy consumption, thus allowing unlimited use.
Unlike regular Fins, the Swim Charge Fins do not provide a 15% speed bonus.
The Swim Charge Fins must be placed in the feet slot of the PDA to take effect. When not worn, they take up four spaces (2×2) in the inventory.
Data Box Location
The blueprint for the Swim Charge Fins can be found in a Data Box on a crate just outside the Omega Lab.
- Coordinates: (550, -202, -1075)
Mechanics
The Swim Charge Fins require a swim speed of above 2.0 m/s to work. If the player is carrying too many tanks (including paperdoll-equipped), the speed will be too slow to charge anything. Equipping the Reinforced Dive Suit also slows down swim speed. Using the Seaglide will result in slowly recharging the battery.
- Base swim speed with a held device, Swim Charge Fins, and without Reinforced Dive Suit: 4.75 m/s
- Swim speed has a lower limit of 1.90 m/s.
Swim Speed Reduction
The following items reduce swim speed. These penalties stack with each other.
| Item | In Inventory Penalty (m/s) | In Paperdoll Penalty (m/s) |
|---|---|---|
| Reinforced Dive Suit | N/A | -0.95 |
| Ultra High Capacity Tank | -1.21 | -0.61 |
| Standard O₂ Tank | -0.81 | -0.40 |
| Lightweight High Capacity Tank | -0.21 | -0.10 |
Note: Numbers appear to be rounded to 2 decimal units.
Examples
For instance, wearing a Reinforced Dive Suit, with an Ultra High Capacity Tank in the paperdoll and one Standard O₂ tank in inventory would give a speed of:
4.75 - 0.95 - 0.61 - 0.8 = 2.39 m/s (Therefore, Swim Charge Fins will work)
However, adding two more Plasteel Tanks to the inventory will bring the swim speed to below 2.0 m/s, thus preventing charging.
Note: Swim Charge Fins do not work inside an Alien Containment.
Recipe
This item is crafted in the Modification Station.
- 1x Titanium
- 1x Battery
- 1x Fins
Data
| Attribute | Details |
|---|---|
| Category | Equipment |
| Description | Wirelessly charges your held tool while you swim. |
| Blueprint Source | Data Boxes (Omega Lab) |
| Crafting Station | Modification Station |
| Build Time | 3 seconds |
| Size | 4 (2×2) |
| Attribute | Charges held tool |
| Debug ID | swimchargefins |
